Tandem Marine Shop
 Connexion  

Clipper Sondeur répétiteur

Clipper Sondeur répétiteur
 Cliquer sur la loupe pour voir le zoom 
Clipper Sondeur répétiteur
Référence : NMCDR
The Clipper Depth Repeater has its own independent alarm function as well as repeating all data from the master unit.

Note – this is not a stand alone unit and cannot be connected to a depth transducer.
It must be connecetd to the Clipper Depth master display unit.

NOUVEAU : 3 ans de garantie !

Technical Specifications

Deep and shallow alarms (audible and visual)
Consumption 10mA + 25Ma for backlight (max)
7 level display backlighting
Complete with 5 metre cable, ‘O’ ring and weather cover


INTRODUCTION
Clipper Repeater units are supplied with a standard mounting kit. They are also supplied with attached 5 or 10 metre leads which plugs into the rear socket on the master units. They require no other connections, because they get their power and signals from the master units, which are in turn powered by the vessel's power supply. Clipper Repeater units must be matched to the master units they are connected to.
The Clipper range of repeaters offers intelligent operation so the repeater can be configured to operate in different modes to the master. For example, the backlight setting is independently controllable on all types. The Log can display any of the three options (speed, total distance, and Trip distance) whatever is being displayed on the master. The Wind speed and Direction repeater can display any speed and pointer type, and the Compass can offer assisted steering commands and alarms which are fully independent of the master unit.
Produits disponibles : 0
Évaluation Aucune évaluation Aucun commentaire Lire ou écrire un commentaire
Ajouter un commentaire
Note
Pseudo
Email (facultatif)
Commentaire
Copier lꞌimage